62 research outputs found
High performance computing for a 3-D optical diffraction tomographic application in fluid velocimetry
Optical Diffraction Tomography has been recently introduced in fluid velocimetry to provide three dimensional information of seeding particle locations. In general, image reconstruction methods at visible wavelengths have to account for diffraction. Linear approximation has been used for three-dimensional image reconstruction, but a non-linear and iterative reconstruction method is required when multiple scattering is not negligible. Non-linear methods require the solution of the Helmholtz equation, computationally highly demanding due to the size of the problem. The present work shows the results of a non-linear method customized for spherical particle location using GPU computing and a made-to-measure storing format
Procesadores de bajo coste y su aplicación en la docencia de Ingeniería de Computadores
La Informática evoluciona a gran velocidad y es necesario actualizar con frecuencia los recursos de aprendizaje para mantener el interés de los estudiantes. En la actualidad, hay una gran diversidad de plataformas de cómputo de bajo coste que son utilizadas como recursos en los estudios de Informática. Raspberry Pi y algunos modelos de Arduino (como Arduino Due), ambas basadas en procesadores ARM, son ejemplos representativos de este tipo de plataformas. Las arquitecturas ARM son ejemplos de procesadores RISC que actualmente gozan de gran popularidad por su buena relación entre potencia computacional, consumo y coste. De hecho, constituyen el núcleo de muchos de los teléfonos móviles y sistemas empotrados actuales. Al estar tan cerca de los estudiantes, el uso de este tipo de recursos en el aula representa una oportunidad para: (1) motivar a los alumnos de Bachillerato y Educación Secundaria para estudiar el Grado de Informática y (2) potenciar el interés de los alumnos de Grado de Informática por la Ingeniería de Computadores. Existe una serie de eventos consolidados que tienen una gran difusión social. En ellos, se muestran vistosos ejemplos de aplicación y funcionamiento de este tipo de plataformas. En este trabajo se describen el conjunto de sistemas interactivos y basados en plataformas computacionales de bajo coste que se han desarrollado para ser utilizadas en este tipo de eventos. De acuerdo con nuestra experiencia de participación, creemos que están sirviendo para despertar el interés del alumno de secundaria por la Informática en general, y más específicamente por la Ingeniería de Computadores. Por otra parte, un porcentaje de los alumnos que cursan el Grado de Ingeniería Informática no está interesado en el análisis de los componentes hardware y de su organización para construir un computador moderno. Piensan que la asignatura de Arquitectura de Computadores del Grado en Ingeniería Informática está lejos de su futura actividad profesional. En este contexto, nos planteamos seleccionar ARM como arquitectura de referencia para desarrollar los contenidos de la asignatura de Arquitectura de Computadores. Creemos que esta decisión mejora el interés del alumno por dos motivos: (1) el objeto de estudio se usa en multitud de plataformas muy cotidianas para el alumno y (2) es posible diseñar las actividades prácticas de las asignaturas basadas en elementos reales y no únicamente virtuales. Este trabajo muestra las distintas actividades tanto a nivel teórico como práctico que se plantean al alumno en el marco de la asignatura Arquitectura de Computadores.Computer Science is advancing rapidly and it is necessary to keep the educational resources up to date in order to keep the interest of students. Nowadays, there is a wide variety of low-cost computing platforms that are used as educational resources in the Computer Science degree. Raspberry Pi and some models of Arduino (such as Arduino Due), which are both based on ARM processors, are representative examples of this kind of platforms. ARM architectures are instances of RISC processors which nowadays have reached an important popularity due to their good relation between performance, consumption and cost. In fact, they constitute the core of numerous current mobile phones and embedded systems. Considering their proximity to the students, the use of this kind of resources in the classroom is an opportunity to: (1) encourage the high schools pupils to study the Computer Science degree and (2) to increase the interest of the students for the Computer Engineering. There are several consolidated informational events of great social outreach in which different examples of application of this kind of platforms are shown. In this work, the set of interactive systems designed to be used in this kind of events is described. According to our experience, we think that they arouse the interest of high schools pupils for the Computer Science in general, and, more specifically, for the Computer Engineering. Furthermore, a percentage of the students of the Computer Science degree is not interested in the analysis of hardware components and the architecture of modern computers. They think that the subject of Computer Architecture of the Computer Science Degree is far from his/her future career. In this context, we will select ARM as a reference architecture where the contents of the subject Computer Architecture will be developed on. We think this might improve the motivation of the students mainly for two reasons: (1) the object of study is being used in a lot of modern platforms; and (2) it is possible to design the practical activities of the subjects using real platforms and not only virtual ones. This work shows the activities proposed to the students in the context of the subject Computer Architecture, considering both practical and theoretical approaches
Granzyme A inhibition reduces inflammation and increases survival during abdominal sepsis
Aims: Peritonitis is one of the most common causes of sepsis, a serious syndrome characterized by a dysregulated systemic inflammatory response. Recent evidence suggests that Granzyme A (GzmA), a serine protease mainly expressed by NK and T cells, could act as a proinflammatory mediator and could play an important role in the pathogenesis of sepsis. This work aims to analyze the role and the therapeutic potential of GzmA in the pathogenesis of peritoneal sepsis. Methods: The level of extracellular GzmA as well as GzmA activity were analyzed in serum from healthy volunteers and patients with confirmed peritonitis and were correlated with the Sequential Organ Failure Assessment (SOFA) score. Peritonitis was induced in C57Bl/6 (WT) and GzmA-/- mice by cecal ligation and puncture (CLP). Mice were treated intraperitoneally with antibiotics alone or in combination serpinb6b, a specific GzmA inhibitor, for 5 days. Mouse survival was monitored during 14 days, levels of some proinflammatory cytokines were measured in serum and bacterial load and diversity was analyzed in blood and spleen at different times. Results: Clinically, elevated GzmA was observed in serum from patients with abdominal sepsis suggesting that GzmA plays an important role in this pathology. In the CLP model GzmA deficient mice, or WT mice treated with an extracellular GzmA inhibitor, showed increased survival, which correlated with a reduction in proinflammatory markers in both serum and peritoneal lavage fluid. GzmA deficiency did not influence bacterial load in blood and spleen and GzmA did not affect bacterial replication in macrophages in vitro, indicating that GzmA has no role in bacterial control. Analysis of GzmA in lymphoid cells following CLP showed that it was mainly expressed by NK cells. Mechanistically, we found that extracellular active GzmA acts as a proinflammatory mediator in macrophages by inducing the TLR4-dependent expression of IL-6 and TNFa. Conclusions: Our findings implicate GzmA as a key regulator of the inflammatory response during abdominal sepsis and provide solid evidences about its therapeutic potential for the treatment of this severe pathology
The Milky Way Bulge: Observed properties and a comparison to external galaxies
The Milky Way bulge offers a unique opportunity to investigate in detail the
role that different processes such as dynamical instabilities, hierarchical
merging, and dissipational collapse may have played in the history of the
Galaxy formation and evolution based on its resolved stellar population
properties. Large observation programmes and surveys of the bulge are providing
for the first time a look into the global view of the Milky Way bulge that can
be compared with the bulges of other galaxies, and be used as a template for
detailed comparison with models. The Milky Way has been shown to have a
box/peanut (B/P) bulge and recent evidence seems to suggest the presence of an
additional spheroidal component. In this review we summarise the global
chemical abundances, kinematics and structural properties that allow us to
disentangle these multiple components and provide constraints to understand
their origin. The investigation of both detailed and global properties of the
bulge now provide us with the opportunity to characterise the bulge as observed
in models, and to place the mixed component bulge scenario in the general
context of external galaxies. When writing this review, we considered the
perspectives of researchers working with the Milky Way and researchers working
with external galaxies. It is an attempt to approach both communities for a
fruitful exchange of ideas.Comment: Review article to appear in "Galactic Bulges", Editors: Laurikainen
E., Peletier R., Gadotti D., Springer Publishing. 36 pages, 10 figure
Search for Higgs bosons decaying to tautau pairs in ppbar collisions at sqrt(s) = 1.96 TeV
We present a search for the production of neutral Higgs bosons decaying into
tautau pairs in ppbar collisions at a center-of-mass energy of 1.96 TeV. The
data, corresponding to an integrated luminosity of 5.4 fb-1, were collected by
the D0 experiment at the Fermilab Tevatron Collider. We set upper limits at the
95% C.L. on the product of production cross section and branching ratio for a
scalar resonance decaying into tautau pairs, and we then interpret these limits
as limits on the production of Higgs bosons in the minimal supersymmetric
standard model (MSSM) and as constraints in the MSSM parameter space.Comment: 7 pages, 5 figures, submitted to PL
Measurement of three-jet differential cross sections d sigma-3jet / d M-3jet in p anti-p collisions at sqrt(s)=1.96 TeV
We present the first measurement of the inclusive three-jet differential
cross section as a function of the invariant mass of the three jets with the
largest transverse momenta in an event in p anti-p collisions at sqrt(s) = 1.96
TeV. The measurement is made in different rapidity regions and for different
jet transverse momentum requirements and is based on a data set corresponding
to an integrated luminosity of 0.7 fb^{-1} collected with the D0 detector at
the Fermilab Tevatron Collider. The results are used to test the three-jet
matrix elements in perturbative QCD calculations at next-to-leading order in
the strong coupling constant. The data allow discrimination between
parametrizations of the parton distribution functions of the proton.Comment: 10 pages, 4 figures, 2 tables, submitted to Phys. Lett. B, corrected
chi2 values for NNPD
Search for pair production of the scalar top quark in muon+tau final states
We present a search for the pair production of scalar top quarks
(), the lightest supersymmetric partners of the top quarks, in
collisions at a center-of-mass energy of 1.96 TeV, using data
corresponding to an integrated luminosity of {7.3 } collected with the
\dzero experiment at the Fermilab Tevatron Collider. Each scalar top quark is
assumed to decay into a quark, a charged lepton, and a scalar neutrino
(). We investigate final states arising from and
. With no significant excess of events observed above the
background expected from the standard model, we set exclusion limits on this
production process in the (,) plane.Comment: Submitted to Phys. Lett.
Measurements of inclusive W+jets production rates as a function of jet transverse momentum in ppbar collisions at sqrt{s}=1.96 TeV
This Letter describes measurements of inclusive W (--> e nu) + n jet cross
sections (n = 1-4), presented as total inclusive cross sections and
differentially in the nth jet transverse momentum. The measurements are made
using data corresponding to an integrated luminosity of 4.2 fb-1 collected by
the D0 detector at the Fermilab Tevatron Collider, and achieve considerably
smaller uncertainties on W +jets production cross sections than previous
measurements. The measurements are compared to next-to-leading order
perturbative QCD (pQCD) calculations in the n =1-3 jet multiplicity bins and to
leading order pQCD calculations in the 4-jet bin. The measurements are
generally in agreement with pQCD predictions, although certain regions of phase
space are identified where the calculations could be improved
Measurement of spin correlation in ttbar production using dilepton final states
We measure the correlation between the spin of the top quark and the spin of
the anti-top quark in (ttbar -> W+ W- b bbar -> l+ nu b l- nubar bbar) final
states produced in ppbar collisions at a center of mass energy sqrt(s)=1.96
TeV, where l is an electron or muon. The data correspond to an integrated
luminosity of 5.4 fb-1 and were collected with the D0 detector at the Fermilab
Tevatron collider. The correlation is extracted from the angles of the two
leptons in the t and tbar rest frames, yielding a correlation strength C=
0.10^{+0.45}_{-0.45}, in agreement with the NLO QCD prediction within two
standard deviations, but also in agreement with the no correlation hypothesis.Comment: 10 pages, 3 figures, submitted to PL
- …